Pneutech

ELECTRIC ACTUATORS – TOLOMATIC

Pneutech's range of high quality Tolomatic Electric Actuators satisfy the most demanding pneumatic cylinders users Australia wide.

Rodless Actuators

Compact size, stroke contained within actuator body, load supported.

Space savings:
A typical rod style actuator with a 2-inch body size and an 8-inch stroke, has an approximate overall length when the rod is extended of 21.75 inches.
The equivalent 2-inch body size, 8-inch stroke rodless actuator has an overall length of 14.3 inches. Since the stroke is contained within the actuator itself, there is a 34% smaller footprint than a rod style. As the stroke length increases, so does the space savings of a rodless actuator.

Supported loads:
A rodless actuator guides and supports the load throughout the entire stroke length. Utilising a variety of different bearing and load carrying design techniques, bending moments are better controlled resulting in long wear without seal or bearing stress.

Rod Screw Actuators

Basic Linear Motion, rod extends from actuator body.

RSA/RSM Series
Rod Screw Actuators.
High performance, high thrust with mounting flexibility for guided and supported loads.

GSA/GSM Series
Guided Screw Actuators.
Moderate thrust with a self-contained load guidance and support system.

NEW! IMA Integrated Motor Actuators
Servo motor and rod-style actuator in one compact package. 100% duty-cycle, high force.

NEW! ICR SmartActuators
Servo motor, drive, controller and linear actuator in one compact package. 100% duty-cycle performance.

Brushless Servo Systems

High resolution, quiet operation and maintenance free.

Tolomatic Electric Linear Motion Brushless Servo Systems offer the following application benefits:

• Extremely smooth and quiet operation
• Good for high torques [(up to 45 in-lb (5.08 N-m) continuous, 140 in-lb (15.82 N-m) peak]
• Good for high speeds, up to 6,000 RPM
• High resolution, 4,000 counts per revolution
• Provide torque control
• Good for short, repetitive moves
• Maintenance free with no moving contacts.

Microstepping Systems

Low cost precise positioning with high resolution – Motors, Drives, Controls, and Accessories.

Tolomatic has partnered with Applied Motion Products to offer a line of Electric Stepper Products, that provide optimal performance when combined with our electric actuators. These Stepper products offer the following application benefits:

• Lowest cost for precise positioning
• Highest resolution (up to 51,200 steps-rev) without feedback device
• Good for high speeds, up to 3,000 RPM
• Torque requirements up to 1845 oz-in. (13.03 Nm)
• Smoothness better than full or half step
• Maintenance free

For more information about Tolomatic Electric Actuator products –
Contact Pneutech Head Office